SAMdisk v3 by Simon Owen is out, it's a command-line disk image utility for Windows 2000 or later. The utility supports transfers between floppy disks and disk images (DSK/MGT/IMG/HDF), and is designed to work with almost any soft-sectored disk format compatible with the PC floppy controller, including some copy-protected formats. Low-level floppy device access requires the fdrawcmd.sys driver to be installed.

You can use a java GUI written by DevilMarkus : SAMdisk GUI.

This utility requires a floppy drive connected to a standard motherboard connector. USB floppy drives cannot be supported as there is no way to access their embedded floppy controller chip.

Need some Amstrad CPC parts ? Well time to go on Eliot's shop !

Rules of this useful shop :

- parts are aimed to be used in the CPC community or any other 8bits friendly community,
- some parts are rare so please order only what you really need,
- please do not resell parts you got from the site.

Welcome to Coutances, home of Amstrad Expo meeting, organized by the tiredless Eliot. Arrived Friday in the morning, 2 people already, myself and a distinguished member of Greece : Voxfreak.

Symbos running on Eliot's computer with a symbiface and a Compact Flash card working as a hard disc.

Voxfreak (left) and Eliot (right).

Bad news, GamebaseCPC will stop to share its work.

Good news, dumps of programs will still be available on CPC-POWER.

Current order on Ebay of the SDCard HxC floppy emulator. The price is 60 sterling pounds (add shipping cost).

You will also need a cable :

• cable for standard CPC (not Schneider or CPC+),
• cable for CPC+,
• cable for a Schneider CPC (not CPC+).

You can download Arkos Tracker v1.0 beta 3 for PC by Targhan.

Here's the changelist :

• AKStoYM, a command line tool to convert any AKS song into an interleaved or non-interleaved YM6 format,
• MSX2 compatible player test thanks to WYZ.

If you don't have .Net, you can still use the command line tools (AKStoYM, STKtoAKS, AKStoYM) if you have Mono installed.

Another order on Ebay of the SDCard HxC floppy emulator. The price is 60 sterling pounds (add shipping cost).

You will also need a cable :

• cable for standard CPC (not Schneider or CPC+),
• cable for CPC+,
• cable for a Schneider CPC (not CPC+).

Dont forget that you need a 5 volts alimentation for the HxC.

See below for a nice integration of the HxC inside an Amstrad CPC by MUSICMAN3512 of the CPC Rulez forum :

GameBase CPC v15 is out.

Version 3 of SDiskEmul by Sundance, a floppy disk emulator, is available.

SDiskEmul works with Atari XE/XL (SIO mode), Atari gamme ST, Amiga (MFM mode) and Amstrad CPC. Writing is only possible with Atari .ST disks images.

Version 3 brings :

• installation without soldering on SCART,
• graphic resolution : 320x240 (40x32 characters),
• PS2 mouse port included,
• hardware and software optimization : performances up to 50%.

You can check a video of SDiskEmul v3 on Youtube.